Service manual

70
Grasp each side of top front frame and pull forward. Front frame should tilt
outward at the top enough to access door lock motor. Bottom of front frame
should remain behind bottom oven front frame tabs, see (Fig. 34). NOTE: If
front frame is pulled too far forward it is possible to chip the porcelain of
the top and bottom front frame where they are joined, see (Fig. 35). Do not
attempt to remove front frame from unit.
1.
Fig. 34
Fig. 35
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Porcelain may have sharp edges.
Removing Front Frame (Top Oven)