Service manual

85
Removing Convection Element
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Ensure oven cavity and components are cool before
proceeding.
Remove (3) screws from Convection
Cover as shown in (Fig. 1). Remove
Cover from oven and set aside.
Remove (2) screws from Convection
Element as show in (Fig. 2).
Pull element forward revealing wires.
Disconnect wires from terminals as
shown in (Fig. 3). (NOTE: Always
pull from connectors, not the wires.
Pulling from the wires can cause
damage to wire and / or terminal.)
Remove convection element from
oven.
1.
2.
3.
4.
5.
Fig. 1
Fig. 2 Fig. 3