Service manual

87
Removing Broil Element
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Ensure oven cavity and components are cool before
proceeding.
Fig. 4
Fig. 5
Remove (2) screws from Broil
Element supports and (2) screws
from rear support brackets, see
(Fig. 4). NOTE: Place free hand on
Element to prevent from falling.
Pull Element forward to reveal wires.
NOTE: Pulling quickly could cause
wires to disconnect from terminals
and fall behind unit.
Tilt front of Element down and let it
rest on the bottom of the oven cavity,
see (Fig. 5).
Disconnect wires from terminals.
(NOTE: Always pull from
connectors, not the wires. Pulling
from the wires can cause damage
to wire and terminal.)
Remove Element from oven.
1.
2.
3.
4.
5.