Specifications

11
STEP 5. Install Slide Rails
INSTALLATION STEPS
Two (qty. 2) slide rails (included with the Connect Io
Intelligent Oven) help to install the oven into your
cabinet more easily, by providing a flat smooth surface
on which to slide the oven into place.
The slide rails are 2” x 23” (5.1 cm x 58.4 cm) flat metal
strips with adhesive tape strips on one side. Attach the
two slide rails to the cabinet floor approximately 18”
(45.7 cm) apart, and parallel to the oven/cabinet sides.
If possible, the rails should be placed on top of any studs
that might be located under the cabinet interior floor.
j Remove adhesive backing from one of the slide rails.
k Place the slide rail onto the cabinet floor (adhesive
side down) approximately 9” (22.9 cm) to the LEFT of
the cabinet floor CENTER depth axis, and press the slide
rail firmly against the cabinet floor.
l Remove adhesive backing from the remaining slide rail.
m Place the slide rail onto the cabinet floor (adhesive
side down) approximately 9” (22.9 cm) to the RIGHT of
the cabinet floor CENTER depth axis, and press the slide
rail firmly against the cabinet floor.
23” (58.4 cm)
Adhesive strips
Separate rails by
approximately
18” (45.7 cm)
Cabinet interior floor
Slide Rail
cabinet floor
CENTER
depth axis
9” (22.9 cm)
9” (22.9 cm)