WARLORD MOUSE USER MANUAL
1 System Requirements Microsoft Windows PC with a built-in USB port Optical drive 50 MB free disk space 2 Installation 1. Install a software from CD included in package contents or download it from http:// www.connectit.cz/wp-content/uploads/2014/12/ci-390-software.zip. 2. Open the driver folder and launch the setup.exe file. 3. Click “Next”. 4. Click “Finish” to finish installation. 5. Plug the WARLORD MOUSE into your computer and wait for succesful finish of the driver installation.
Key Setting Left Click Left Click Right Click Right Click Mid Click Mid Click Forward Forward Backward Backward Triple-click Left triple click DPI Switch (+/-/Loop) DPI switching (increase, decrease, loop) RGB On/Off Backlight on/off Windows Launching a multimedia player, an e-mail client, calculator, explorer etc.
DPI Effect Standard mode Mouse continuously lit Respiration mode Backlight slowly lights and goes out, the speed of the cycle can be regulated using a parameter Neon mode Mouse flashing, cycle speed can be regulated using a parameter Advanced Settings Advanced Settings can be accessed via the gear icon in the top left corner of the application. Here, you can set response, scroll wheel speed, double-click speed, and you can record macros.
Macro Setting Macro is a record of keys that are pressed on a keyboard during its recording. It is used to facilitate simple repeated tasks (such as retrieving magic in a game etc.). Recording 1. Enter the name of the macro in the field below the buttons “Start recording” and “Stop recording” 2. Set the number of repetitions 3. Click “start recording” 4. Press the keys that you want to record in the macro (use “Insert a mouse event” to insert a mouse action) 5. Press “Stop recording” 6.
