User's Manual

WiReach BK Data Sheet ii

Information provided by Connect One Ltd. is believed to be accurate and reliable.

However, Connect One assumes no responsibility for its use, nor any infringement of

patents or other rights of third parties, which may result from its use. No license is

granted by implication or otherwise under any patent rights of Connect One other than for

circuitry embodied in Connect One’s products. Connect One reserves the right to change

circuitry at any time without notice. This document is subject to change without notice.

The software described in this document is furnished under a license agreement and may

be used or copied only in accordance with the terms of such a license agreement. It is

forbidden by law to copy the software on any medium except as specifically allowed in the

license agreement. No part of this document may be reproduced or transmitted in any

form or by any means, electronic or mechanical, including but not limited to photocopying,

recording, transmitting via fax and/or modem devices, scanning, and/or information

storage and retrieval systems for any purpose without the express written consent of

Connect One.

WARNING: THE WiReach BK IS AN RF MODULE INTENDED FOR EMBEDDING IN A

HOST DEVICE. LOCAL RELEVANT RF REGULATIONS SUCH AS ALLOWED

FREQUENCIES AND USAGE IN COMMERCIAL FLIGHTS MUST BE OBSERVED.

SAFETY INSTRUCTIONS MUST BE INCLUDED IN THE MANUALS OF THE HOST

DEVICE. CONNECT ONE ASSUMES NO LIABILITY FOR CUSTOMER FAILURE TO

COMPLY WITH THESE PRECAUTIONS.

iChip, WiReach BK, IP Communication Controller, SerialNET, AT+i and Connect One are

trademarks of Connect One Ltd.