User's Manual

Connect One
Introduction
WiReach BK Data Sheet 1-2
Internet Protocols
ARP, ICMP, IP, UDP, TCP, DHCP, DNS,
NTP, SMTP, POP3, MIME, HTTP, FTP
and TELNET
Security Protocols
SSL3/TLS1, HTTPS, FTPS, RSA,
AES-128/256, 3DES, RC-4, SHA-1, MD-
5, WEP, WPA and WPA2
Protocols Accelerated in HW
AES, 3DES and SHA
Application Program Interface
Connect One’s AT+i protocol
SerialNET mode for transparent serial
data-to-Internet bridging
Wireless Specifications
Standards Supported: IEEE 802.11b,
IEEE 802.11g
 Frequency:
Europe – 2.412-2.472GHz
USA – 2.412-2.462GHz
Japan – 2.412-2.484GHz
 Channels:
Europe – 13 channels
USA – 11 channels
Japan – 14 channels
Recommended Antenna
iW-ANT2-BL Antenna: 2.4GHz, 2.0dBi, 50Ω,
omni-directional, 1/4 wavelength dipole
configuration, VSWR≤2.0,
Warranty
One year
Certifications
• Radio and EMC:
- USA
o CFR Title 47
o IFCC Part 15.247
o FCC Part 15/ICES-003 class B
- Canada
o Industry Canada ICES-003, RSS-
Gen, RSS-210
- EU
o EN 300 328 V1.7.1 (2006-10)
o EN 301 489-1 V1.8.1 (2008-04)
o EN 301 489-17 V 1.3.2 (2008-04)
CE – Self declaration
- Japan
o Article 38-2 Paragraph1 Item 1:
Low Power Data Communications
System in 2.4 GHz Band
• Safety:
o UL 60950
o CAN/CSA-C22.2 No. 60950
o EN 60950-1, Low Voltage Directive
(2006/95/EC)
THIS DEVICE COMPLIES WITH PART
15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.(*)
Installation Requirements
The WiReach BK must be installed
within a full-enclosure device that is
safety certified.
(*) NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.