User's Manual

Nano WiReach SMT G2 –Datasheet

3. Typical Applications

Adding IP communications over WiFi to serial embedded devices.

Replacing a LAN cable with a WiFi connection.

Adding SSL security to M2M solutions.

LAN to WiFi Bridge - allowing transparent bridging of LAN client over WiFi (Cable replacement),

using direct RMII connection to existing MAC hardware or direct PHY-to-PHY connection.

SerialNet

Serial to WiFi Bridge - allowing transparent bridging of Serial over WiFi, using a 3Mbps

fast UART. This is a true plug-and-play mode that eliminates any changes to the host application.

PPP modem emulation – allowing existing (i.e. modem) designs currently using PPP to connect

transparently over WiFi.

Full Internet Controller mode – allowing simple MCU to use the Nano WiReach SMT’s rich protocol

and application capabilities to perform complex Internet operations such as E-mail, FTP, SSL,

embedded Web server and others. It also acts as a firewall, providing a security gap between the

application and the network.

HOST

EMAC

Ethernet

SMT-G2

MAC to MAC

RMII

PHY to PHY

HOST

EMAC