Switch User Manual

Connect Tech Blue Heat/Net Sync User Manual
34 Revision 0.03
•
Server IP Address: This option sets the server IP address. This is used as the Server
address to use when bootp mode or TFTP mode is enabled. The default Server IP
address is 0.0.0.0
•
Blue Heat/Net Sync IP Address: This option sets the IP address of your Blue Heat/Net.
The default IP address for your Blue Heat/Net Sync is 192.168.42.1
•
Domain Name: This option sets the domain name of your Blue Heat/Net. The default
domain name is blueheat.net.
•
Host Name: This option sets the hostname of your Blue Heat/Net. The default hostname
is BHNssssss, where ssssss is your Blue Heat/Net Sync serial number.
•
Gateway IP Address: This option sets the Gateway IP address for your Blue Heat/Net.
The default Gateway IP address is 0.0.0.0
•
Broadcast IP Address: This option sets the Broadcast IP address. The default Broadcast
IP address is 255.255.255.255.
•
Subnet Mask: This option sets the Subnet mask IP address. The default Subnet mask IP
address is 255.255.255.0.
•
Bootfile Name: This option specifies the default file name which will be used for Blue
Heat/Net Sync boot-up, if TFTP is enabled. If TFTP is enabled, the Blue Heat/Net Sync
will attempt to download the bootfile you specify from a Server IP address you specify
(see "Server IP Address" above). The bootfile name should reference a valid uClinux
kernel image. If TFTP is enabled, the Blue Heat/Net Sync unit will attempt to download
this image, and will also attempt to decompress the image and run it.
•
TCP Port: This option allows you to change the starting local TCP port that is used to
service clients connecting to the Blue Heat/Net Sync unit. The default TCP port is
49152. When altering the TCP port on the Blue Heat/Net Sync unit, you must also alter
it on the user‟s side.
•
Domain Server IP Address: This option sets the Domain Name Server IP address. The
default DNS IP address is 0.0.0.0.
After you've made any necessary configuration changes, click the Submit button at the bottom of
the page. A confirmation page will show up confirming the Blue Heat/Net Sync changes.