Technical data

Configuration
CPU 317T: Technology Functions
4-88 A5E00251798-03
4.7.1 Inserting a cam disk
Requirements
• The data of the Technology CPU are configured in HW Config and are
compiled.
How to insert a cam disk in S7T Config
Step Description
1.
To create a new cam disk in S7T Config using CamEdit, double-click "Insert cam disk" in the
Navigator of S7T Config.
To create the cam disk using the optional SW package SCOUT CamTool, double-click "Insert
cam disk with CamTool" (this entry is only visible if the optional package is installed.)
In the next phases of this example, we shall refer only to CamEdit. For a detailed description of
the functions and handling of SCOUT CamTool, refer to the "SIMOTION CamTool" manual.