Technical data

Download, testing and diagnostics
CPU 317T: Technology Functions
A5E00251798-03
8-37
8.9.2 Starting the axis control panel
Make sure the following conditions are satisfied:
1. The axis is configured.
2. S7T Config is in online mode.
3. The technology was downloaded to the target system.
To start the axis control panel, proceed as follows:
1. In the project navigator, open the "AXES" folder.
2. Select an axis.
3. Select Edit > Open object.
4. Select Axis > Control panel.
The "Control panel" tab appears in the detail view. The control panel is in
monitoring mode.
8.9.3 Layout of the axis control panel
The axis control panel is divided into several different areas:
Axis control panel (the control panel is in control mode)