Technical data

Appendix
CPU 317T: Technology Functions
A-58 A5E00251798-03
Name
(Expert list in S7T Config)
Values Description S7 Int.
technolog
y
CYCLIC Cyclic cam: 31 35
NOCYCLIC Acyclic cam 32 92
EnumCamMode CYCLIC_ABSOLUTE Cyclic absolute cam disk 35 36
CYCLIC_RELATIVE Cyclically relative cam disk 36 37
NO_CONSTRAINTS Acyclic cam 37 96
EnumCamPositionMode USER_DEFAULT User default / default 2 149
ACTUAL Indication with scaling and offset 33 7
BASIC Indication without scaling and offset 34 16
EnumChangeMode NEVER no changeover 92 0
IN_POSITION Changeover when axis is in positioning window 93 1
IN_STANDSTILL Changeover when axis is below zero speed 94 3
IMMEDIATELY Immediate changeover 95 7
EnumDirection USER_DEFAULT User default / default 2 149
EFFECTIVE Last programmed default direction 3 45
NEGATIVE Negative 4 85
POSITIVE Positive 5 107
BY_VALUE From sign of speed setpoint value 38 24
SHORTEST_WAY Shortest path 39 121
EnumDirectionType NEGATIVE Negative direction 4 1
POSITIVE Positive direction 5 0
EnumErrorReporting NO_REPORTING No 40 0
COMMAND_VALUE_
Tolerance
Setpoint values 41 1
ACTUAL_VALUE_ TOLERANCE Actual values 42 2
EnumFollowingObject SynchronizingDirection USER_DEFAULT User default / default 2 149
SHORTEST_WAY Shortest distance without direction preset 96 121
SYSTEM_DEFINED Compatibility mode 97 316
SAME_DIRECTION Same direction as master 98 317
POSITIVE_DIRECTION Positive synchronization direction 99 319
NEGATIVE_DIRECTION Negative synchronization direction 100 320
EnumForceDirection USER_DEFAULT User default / default 2 149