Technical data

Commissioning

3.3 Preparing the connection to the SINAMICS

Connection of the SINAMICS S120 to the Technology CPU

Product Information, 09/2011, A5E00480378-04

3.3 Preparing the connection to the SINAMICS

3.3.1 Overview

Introduction

To establish a connection for the configuring of the SINAMICS S120 between the

programming device and the drive system, several preliminary tasks must be performed;

these tasks are discussed in detail in the following sections.

3.3.2 Creating a STEP 7 project

Procedure

To create a new project, start the SIMATIC Manager and use the File > New menu

command to create a new project, for example, a project with the name DSC_SINAMICS.

Then use the Insert > Station > SIMATIC 300 station menu command to add a new

S7 300 station.