User's Manual Network Adapter JB0, JB1, JB2, JB3

Chapter 1: Introduction 1-3
Titan/cPCI User’s Manual, ver. 0.00
Product Overview
The Titan/cPCI adapters are high performance multi-port serial
adapters that allow you to connect up to 4 serial devices through
one expansion slot.
Your Titan/cPCI product consists of the following components:

Titan/cPCI adapter

Cable harness (optional with four port models only)

Titan/cPCI device drivers
Titan/cPCI Adapters
Titan/cPCI adapters provide the high-speed interfaces between a
host computer’s CompactPCI bus and multiple external serial
devices. Titan/cPCI adapters include features such as:
Features

2 or 4 asynchronous serial ports from one slot.

RS-232 and RS-485/422 interfaces.

Titan/cPCI offers full RS-485/422 support in hardware. The
modes are as follows:
Full Duplex Mode
Half Duplex Mode
Multi-drop Slave Mode

16C950 UARTs control two or four ports.

Each port on a Titan/cPCI adapter has independent baud rate
selection offering baud rates from 50 bps to 1.8342 Mbps
(RS-485/422) or 230.4 Kbps (RS-232), with 5, 6, 7 or 8 data
bits and 1, 1.5, 2 stop bits, odd, even, mark and space parity.

Titan/cPCI adapters come with TransGuard

Transient
Voltage Suppression (surge suppression – IEC 1000-4
compatible), able to withstand multiple strikes on every
signal of every port.

Titan/cPCI adapters offer CompactPCI rear I/O capability.
Please contact your Connect Tech Sales representative for
further information concerning the available rear I/O options
for your Titan/cPCI adapter.

System requirements are one 3U CompactPCI compatible
slot

You can install any number of Titan/cPCI adapters that your
system can accommodate.