Table of Contents ▓ INTRODUCTION ....................................................................................................1 ▓ CONSOLE Overview ...............................................................................................................3 Features ................................................................................................................3 Packing List ...........................................................................................................
Transa PRO‧TransaView Console ------------------------ Introduction The TransaView and Transa PRO offer the ultimate in styling and computer management. With a keyboard mouse, TFT LCD panel and a KVM switch module housed in an industry standard 19" 1U-height rack drawer, it saves you up to 1/3 of valuable real estate from a rack cabinet.
Transa PRO‧TransaView Console The console with 2U-height KVM Switch Module Attached with a 2U-height KVM switch module, the setup takes 1U-height for the console drawer and 2U-height for the KVM switch module behind it.
Transa PRO‧TransaView Console ------------------------ Console Overview Three major models of consoles, Transa PRO 17, Transa PRO 15, and TransaView, are available with 17” LCD panel, 15” LCD panel respectively. These three models share the same accessories (The KVM switch modules and Rear Bracket Kits). The console is a 19” 1U drawer designed for applications where space is at a premium, or CRT displays are undesirable.
Transa PRO‧TransaView Console Packing List Console: "LCD panel + keyboard + mouse pad" console drawer Rear bracket & extension kit: This kit contains two pieces of rear brackets and two pieces of extensions. Make sure you have the correct kit to fit the depth of your cabinet. Note: the following length is measured between "front pole and rear pole inside a rack cabinet" not the outside depth of a rack cabinet enclosure.
Transa PRO‧TransaView Console The KVM Switch Module (Please also see another user’s manual for more details about the KVM Switch module): KVM switch module box can be connected to a console or be used as a stand-alone KVM switch. There are three major categories: PS/2, USB and Sun interfaces. PS/2 Interface No. of console port No. of computer port KVM switch inside OSD menu Height Cable type Model Indicator Type Model name Interface No. of console port No.
Transa PRO‧TransaView Console Assembly 1. Choose a proper position for the rack drawer. Mount the rear brackets (from the Rear bracket & extension kit), and lightly fasten them onto the rear vertical poles. Both will be removed later. 2. Remove the safety stopper from the console drawer. The safety stopper is designed to prevent the drawer from sliding out during transportation. ★ WARNING ★ After the safety stopper is removed, the drawer may slide out when tilted and cause serious injury. 3.
Transa PRO‧TransaView Console 5. Remove both of the rear brackets and slide the console drawer out half way to balance its weight. Now, the front brackets hold the console drawer. 6. Attach the extensions (from the Rear bracket & extension kit) to both sides of the KVM switch module. Please note the length of the extensions and mount them in one of the following ways. For a 2U module, the extensions are mounted to the lower half of the module.
Transa PRO‧TransaView Console 8. Push the rear brackets all the way in and fastens them. 9. Slide the console drawer out. Push the KVM switch module evenly toward the drawer and lock both units by the screws. 10. Make sure the C-36 connectors are firmly mated during step 9. 11. Connect the power supply to the power jack on the KVM switch module to complete the installation.
Transa PRO‧TransaView Console Installation The installations for KVM switch module with computers can be found in the other user’s manual. The combination of a console and an IKM001 can be considered as a set of PS/2 keyboard, mouse and monitor as shown below. The console connects to a computer Or, the console with the 1 1 KVM switch module can be connected to a KVM switch as shown below.
Transa PRO‧TransaView Console Front Panel Front panel of the TransView model Front panel of the Transa PRO 17/ Transa PRO 15 model KVM Control and Status: (This section is effective only when a KVM switch module is connected, not applicable for IKM001 module.) 1. Computer Selection Pad Press one of these pushbuttons to select a computer. For 16-port models: “1”~”8” represent the lower 8 ports and “A”~”H” for the higher 8 ports.
Transa PRO‧TransaView Console Keyboard Status & LCD Panel Power Switch 7. Num Lock Keyboard Num Lock status. 8. Caps Lock Keyboard Caps Lock status. 9. Scroll Lock Keyboard Scroll Lock status. 10. LCD Panel Power Switch Replaceable Keyboard and Touch Pad (For Transa PRO 17 and Transa PRO 15 ONLY) Replaceable Keyboard The keyboard is replaceable for language change or maintenance. Tilt it up, locate the mini-USB cable underneath the keyboard and gently unplug it.
Transa PRO‧TransaView Console Replaceable Touch Pad 1. Touch Pad and Its “Wheel” The Touch Pad simulates a “wheel mouse”. The area of the Touch Pad to the right side of the two small triangular marks is the simulated “wheel” as shown below. 2. Touch Pad Replacement To remove the Touch Pad, press the tab underneath it upward to release the latch, and then slide it outwards till the Touch Pad can be lifted up clear from the notches, as shown in the figure on the right.
Transa PRO‧TransaView Console LCD Panel Specification Specifications Active Display Area Pixel Pitch (mm) Resolution Color Pixel Arrangement Display Mode Brightness(cd/m^2) Contrast Ratio Display Color User Control Input Signal 15” LCD Panel 304.1 x 228.1 (mm) 0.297 (H) x 0.297 (V) 1024 x 768 @60/70/75Hz RGB vertical strip normally white TN 250(cd/m2)@8mA 350:1 16.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT OR INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE PRODUCT EXCEEDS THE PRICE PAID FOR THE PDOCUDT.
