User's Manual

© 2016 Connected Holdings LLC 13 / 19
71. AT+XGPLP GPS Lock Parameters
72. AT+XGPLT GPS Lock Timeout
73. AT+XIGM Ignition Mode
74. AT+XIGV Ignition Voltage
75. AT+XIOD I/O Direction
76. AT+XIOW I/O Write
77. AT+XLEDO LED’s Off
78. AT+XOWM One-Wire Mode
79. AT+XPWL Power Low
80. AT+XPWM Power Modes
81. AT+XPWS Power Save
82. AT+XRLY Set Relay
Maintenance report settings
83. AT+XMHB Maintenance Report Heart Beat
84. AT+XMOP Maintenance-report On Power-up
85. AT+XMRC Maintenance Report Clone
86. AT+XMRPM Maintenance Report Mask
Miscellaneous settings
87. AT+XGF Geo-Fence
88. AT+XGFH Geo-Fence Here
89. AT+XSLCK SIM Lock
90. AT+XCIN Configuration Id Number
91. AT+XCIV Configuration Id Version
Information Commands
Information commands simply output various data regarding the current status of the device.
They are mostly useful for troubleshooting. Following is a list of information commands:
92. AT+XGFR Geo-Fence Read
93. AT+XIOR I/O Read
Configuration reading commands
94. AT+XCFG Configuration
95. AT+XCFD Configuration file – Default
96. AT+XCFU Configuration file – User
Information commands
97. AT+XINCEL Info: Cellular
98. AT+XINDAT Info: Data
99. AT+XINEVT Info: Events
100. AT+XINGPS Info: GPS
101. AT+XINNET Info: Network
102. AT+XINPWR Info: Power