User's Manual

Connected IO,
C
ON
F
I
D
E
N
T
I
A
L
16
CIO Router: CR48NA User Manual
Revision: 1.3
5. System Maintenance
This chapter describes how to back-up the current The Router configuration to your computer, and how
to restore that same configuration later if needed. This can be done by selecting Administrator > Backup
/ Flash Firmware as show in Figure 16
Figure 16: Backup/Restore the Configuration
5.1. Backup the Configuration
Select Backup / Flash firmware in the GUI page as shown in Figure 16, then click the icon “Generate
archive” to save this configuration to a file in the folder you’ve specified.
The file is in .dat format, CIO suggests that you rename it to a meaningful filename for easy recovery.
5.2. Restore the Configuration
Click the icon “Choose File”, select the backup file, and then click “Upload archive” in flash operations
page as shown in Figure 16. Device will write the stored configuration back to flash then reboot the
system.