User's Manual

Connected IO,
C
ON
F
I
D
E
N
T
I
A
L
7
CIO Router: CR48NA User Manual
Revision: 1.3
10
Cellular Antennas SMA connector for both Primary and Auxiliary antenna Ports
11
Wi-Fi LED, Orange: Wi-Fi is connected/Off: No Wi-Fi
Power LED, Yellow: Power is connected/Off: unit is off
Cellcular Connection Strenght Indicators, Green: Cellcular
Connection
The following table lists the signal strength range corresponding to
the number of LEDs lit:
5-LEDs On: Excellent
4-LEDs On: Very Good
3-LEDs On: Good
2-LEDs On: Fair
1-LED On: Weak
No-LEDs: Not functional
2.2. Radio Configurations
Model Name LTE Band (MHz) 3G (MHz) Wi-Fi
CR48NA

B2: 1900
 B4: AWS 1700
 B5: 850
 B12: 700
 B13: 700
 B2: 1900
 B5: 850
 Yes, 802.11 a/b/g/n /ac
compliant
3. System Configuration
3.1. Initial IP Setup
The Router Management GUI can be accessed through the Ethernet ports with the default IP address of
192.168.71.1 .
To configure The Router, follow the following sequence:
• Connect the Ethernet cable between the computer and The Router LAN port
• Setup the desktop as a static IP in 192.168.71. x domain or DHCP client to get IP from The Router
• Open a browser and type http:// 192.199.71.1 to start the settings
On login page, you can just click the Login icon to enter the GUI as shown in Figure 1. Default username
is “root” and default password is “password”, it is recommended that a new password be created under
Web GUI Administrator->Administration page.