User's Manual

PAGE 4 / 6
3. Pairing Bluetrek® S21
Before using the Bluetrek® S21 headset, you must pair it with your Bluetooth®
mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can
communicate.
Pairing only needs to be done once. When moving out of the range (10 meters) or
switching off the headset and then on again, press the TALK button on the headset
to reconnect the Bluetooth® link. If you pair your Bluetooth® mobile phone with
another Bluetooth® device, you will have to pair the Bluetrek®S21 with your phone
again before use. The Headset and Hands-free profile is automatically selected by
the mobile phone during pairing.
IMPORTANT : Before pairing, all Bluetooth® devices must be switched off.
To initiate the pairing, put both the headset and the mobile phone within 0.3 meter (1
foot) from each other. Make sure there is no Wi-Fi equipment operating in the vicinity.
1. Switch on your phone and select the Bluetooth® discover mode on the Mobile
phone (Consult your Bluetooth® mobile phone user guide).
2. Press and hold (do not release it) the TALK for about 7 seconds until the
indicator light flashes red and blue alternately. Then release the TALK button.
3.Once the mobile phone detects the headset, a message is displayed containing
the name of the headset “BLUETREK-S21”.
4. Follow the phone instructions to accept the pairing. The PIN code (or passkey)
is 0000.
5. When the pairing is completed, the indicator light will switch to blue, and
flashes slowly.
If you haven’t started the discovery mode within 5 minutes, the headset will go to
the standby mode. You must then switch off your headset and start the pairing
again.
A very limited number of Bluetooth® mobile phones require a different pairing
process than the one explained above. If you encounter any difficulties to pair
your headset with your mobile phone, visit our website www.bluetrek.com or
consult your dealer.
4. Wearing Bluetrek® S21
The headset can be worn on either ear by rotating the ear clamp. Make sure the
speaker is properly inserted into your ear.
5. Switching Bluetrek® S21 ON and OFF