User Manual

Notes:

 After successful multi-pairing, the paired devices will remember each

other. Unless pairing information is deleted because of new pairing, they

will no need to pair next time. If the pairing information is deleted,

please make the cell phone and the headset set up hands free connection

first and then turn on the Bluetooth transmitter, multi-connecting can be

performed.

 For the cell phone supporting the HSP and A2DP at the same time. It

may set up HSP and A2DP connection with the headset simultaneously.

At this time, the Bluetooth transmitter may not connect to the headset.

Clearing pairing list

The headset can remember 8 paired devices, when the number of paired

devices exceeds 8, the first one will be replaced. You can also clear pairing

list manually.

Function

Status of

headset

Operation Indication tone

Clearing

pairing

list

Turned off or

any other

status

Press and hold

and + buttons for

about 8 seconds

Red LED is on

and there are

indication tones

Note: After clearing pairing list, the heasdset will enter pairing mode

automatically if it is turned on, and doesn’t connect to last connected device

automatically.

3. Re-connecting with a Bluetooth device

1) Automatic connecting

Every time the headset is turned on, it will connect to last connected

device automatically.

2) Manual connecting to last connected device supporting HFP and

A2DP

When the headset is in standby mode and doesn’t connect to a device

supporting HFP and A2DP, short press button once, it will connect to

last connected HFP device automatically.