Operator`s manual

X
Press RES/+ button ; briefly.
The cruise control resumes the
previously set speed.
i
The last set speed stored in memory is
deleted when the engine is turned off.
Changing the set speed
You must have set a speed prior to
increasing or decreasing the current
speed.
i
Depressing the accelerator pedal does
not deactivate the cruise control. After
a brief acceleration (e.g. for passing),
the cruise control will resume the last
set speed.
Continuous adjustment
X
Press and hold RES/+ button ; to
increase the speed.
or
X
Press and hold SET/− = to decrease the
speed.
X
Press and hold the respective button
until the desired speed is reached.
X
Release the respective button.
The new speed is stored.
Adjustment in 1 mph (Canada 1 km/h)
increments
X
Press RES/+ button ; brieflyto increase
the speed.
or
X
Press SET/− = briefly to decrease the
speed.
The new speed is stored after releasing the
respective button.
HVAC (Heating, Ventilation, Air
Conditioning)
Notes on HVAC
G
WARNING
Follow the recommended settings for
heating and cooling given on the following
pages. Otherwise the windows could fog up,
impairing visibility and endangering you
and others.
Air conditioning with climate control*
The air conditioning improves the level of
comfort when driving at high outside
temperatures by cooling and
dehumidifying the air.
Nearly all dust particles, pollutants, are
filtered out by an integrated particle
filter before outside air enters the
passenger compartment through the air
distribution system. It also operates when
the air conditioning is switched off and
you have switched on the blower.
The air conditioning only works when the
engine is running and the blower is
switched on. Maximum effectiveness is
achieved if you drive with the windows
closed.
i
In warmer weather, ventilate the
passenger compartment for a short
period of time before utilizing the air
conditioning.
102
HVAC (Heating, Ventilation, Air Conditioning)
>> Controls.
* optional