OWNER’S MANUAL SLI 2.2 - SLI 4.2 connection.
WARNING • Before you start your installation, make sure you carefully read and understand all instructions. Disregarding them might cause accidental harms or damage your devices. • The vehicle electric system must have 12 VDC voltage with negative to ground. Make sure your car has it in order to avoid any damages to your amplifier and to the vehicle. • Install the device in the vehicle parts where temperature is between 0° C (32° F) and 55° C (131° F).
PACKAGING CONTENTS SLI 2.2 SLI 4.
INSTALLATION - FIXING - SIZE W SLI 2.2 - SLI 4.2 D C L IC K H W H D 61 82 (3.2) 28 (1.1) mm (in.) 61 102 (4) 28 (1.1) mm (in.) SLI 2.2 (2.4) SLI 4.2 (2.
SLI 2.2 CABLE OUTPUT VIEW CONNECTIONS UNIVERSAL SPEAKERS SIMULATOR circuit, simulates the load of the OEM speakers on the 4 Front + Rear input channels, for a complete compatibility with OEM Headunit / OEM Amplifier. SLI 2.
SLI 4.2 CABLE OUTPUT VIEW CONNECTIONS UNIVERSAL SPEAKERS SIMULATOR circuit, simulates the load of the OEM speakers on the 4 Front + Rear input channels, for a complete compatibility with OEM Headunit / OEM Amplifier. SLI 4.
CONNECTIONS: SLI 2.2 with OEM Headunit (without ART ™ function) OFF ON High Power (OEM AMP) Low Power (OEM SOURCE) OEM Headunit OUT (low level) IN (high level) Remote DSR: DOUBLE STEP-DOWN RATIO, allows correct level interfacing with OEM Headunit or OEM Amplifier by switch selection.
OFF ON High Power (OEM AMP) Fuse CONNECTIONS: SLI 2.2 with OEM Headunit (with ART ™ function) Fuse Holder not provided suggested fuse T 1A-delayed. ART FUNCTION TM Low Power (OEM SOURCE) OEM Headunit RED +12 V OUT (low level) IN (high level) Remote GND Black REM OUT Blue DSR: DOUBLE STEP-DOWN RATIO, allows correct level interfacing with OEM Headunit or OEM Amplifier by switch selection.
CONNECTIONS: SLI 4.2 with OEM Headunit (without ART ™ function) High Power OFF (OEM AMP) ON Low Power (OEM SOURCE) OEM Headunit Front Rear OUT (low level) IN (high level) Remote Front Rear DSR: DOUBLE STEP-DOWN RATIO, allows correct level interfacing with OEM Headunit or OEM Amplifier by switch selection.
High Power OFF (OEM AMP) ON Fuse CONNECTIONS: SLI 4.2 with OEM Headunit (with ART ™ function) Fuse Holder not provided suggested fuse T 1A-delayed. ART FUNCTION TM Low Power (OEM SOURCE) OEM Headunit Front RED +12 V Rear OUT (low level) IN (high level) Remote Front Rear GND Black REM OUT Blue DSR: DOUBLE STEP-DOWN RATIO, allows correct level interfacing with OEM Headunit or OEM Amplifier by switch selection.
OFF ON High Power (OEM AMP) Fuse CONNECTIONS: SLI 2.2 with OEM Amplifier (with ART ™ function) Fuse Holder not provided suggested fuse T 1A-delayed. ART FUNCTION TM Low Power (OEM SOURCE) OEM Headunit RED +12 V OEM AMPLIFIER IN (high level) Remote OUT (low level) GND Black REM OUT Blue DSR: DOUBLE STEP-DOWN RATIO, allows correct level interfacing with OEM Headunit or OEM Amplifier by switch selection.
OFF High Power (OEM AMP) ON Fuse CONNECTIONS: SLI 4.2 with OEM Amplifier (with ART ™ function) Fuse Holder not provided suggested fuse T 1A-delayed. ART FUNCTION TM Low Power (OEM SOURCE) OEM Headunit RED +12 V OUT (low level) OEM AMPLIFIER Rear Front IN (high level) Remote Front Rear GND Black REM OUT Blue DSR: DOUBLE STEP-DOWN RATIO, allows correct level interfacing with OEM Headunit or OEM Amplifier by switch selection.
EXP E R TMode SLI 4.2 CABLE OUTPUT VIEW CONNECTIONS UNIVERSAL SPEAKERS SIMULATOR circuit, simulates the load of the OEM speakers on the Lo-Pass + Hi-Pass input channels, for a complete compatibility with OEM Headunit / OEM Amplifier. SLI 4.
EXP E R TMode CONNECTIONS: SLI 4.2 with Audison AP bit amplifier OFF ON High Power (OEM AMP) Low Power (OEM SOURCE) Hi Level IN SPK IN OEM Headunit IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 TW FR Right MID FR Right OEM AMPLIFIER Rear Right WF FR Right WF FR Left Rear Left MID FR Left TW FR Left DSR: DOUBLE STEP-DOWN RATIO, allows correct level interfacing with OEM Headunit or OEM Amplifier by switch selection.
EXP E R TMode CONNECTIONS: SLI 4.2 with Audison AP F8.9 bit amplifier ART FUNCTION TM High Power (OEM AMP) Low Power (OEM SOURCE) MID FR Right TW FR Right OEM AMPLIFIER Rear Right WF FR Right UNUSED OEM Headunit REM OUT UNUSED SPK IN IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 PRE IN REM IN ON Fuse OFF Fuse Holder not provided suggested fuse T 1A-delayed.
TECHNICAL SPECIFICATIONS Input / Output Channels Maximum Input Power Nominal Conversion Ratio Input Impedance SLI 2.2 SLI 4.2 4*/2 4/4 50W@4Ω (Lo-Power) / 150W@4Ω (Hi-Power) 4:1 Lo-Power / 8:1 Hi-Power 200 Ω ** Output Impedance 400 Ω 0,15% 100 Hz, 0,07% 1 kHz, 0,07% 10 kHz Distortion (THD+N@25W rms input, Lo-Power) Frequency Response (-3dB) 15 ÷ 40 kHz Remote Out*** (Only when LSI is Powered) 12 VDC - 100mA max @ 13 VDC input Weight (kg. / lb.) including cable 0,16 (0.36) 0,25 (0.
Note 18
Note 19
LFL000_Rev.22e WARRANTY The products are guaranteed according to the laws in force. Possible damaged products must be sent back, with authorization, to CONNECTION dealer to be repaired or replaced. Products damaged by incorrect use/installation are not covered by warranty. INFO In Italy: supporto.tecnico@elettromedia.it Abroad: support@elettromedia.it CONNECTION PART OF ELETTROMEDIA 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.
