Owner's Manual

17
TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS
SLI 2.2 SLI 4.2
Input / Output Channels 4*/2 4/4
Maximum Input Power 50W@4Ω(Lo-Power)/150W@4Ω(Hi-Power)
Nominal Conversion Ratio 4:1Lo-Power/8:1Hi-Power
Input Impedance
**
200Ω
Output Impedance 400Ω
Distortion
(THD+N@25W rms input, Lo-Power)
0,15% 100 Hz,
0,07% 1 kHz,
0,07% 10 kHz
Frequency Response (-3dB) 15 ÷ 40 kHz
Remote Out
***
(Only when LSI is Powered)
12VDC-100mAmax@13VDCinput
Weight (kg. / lb.) including cable 0,16 (0.36) 0,25 (0.55)
*
DuetothepresenceoftheUSScircuit,pleasemakesuretoconnectthehighlevelcablestotheRLandRRinputsonlyiftheyare
 disconnectedfromtheOEMrearspeakers.
**
InputimpedancewhentheUSSfunctionisOff.
***
IncountrieswherethelegislationonelectromagneticcompatibilityisnotmandatoryunderECE/UNRegulationno.10/5.