User Guide User guide

StreamLine Console
4
l Assembly
1. Choose a proper position for the rack drawer. Mount
the rear brackets (from the Rear bracket & extension
kit), and lightly fasten them onto the rear vertical poles.
Both will be removed later.
2. Remove the stopper from the assembled drawer. The
safety stopper is designed to refrain the drawer from
sliding out during transportation.
““ WARNING ““
After the safety stopper is removed, the drawer may slide out
when tilted and cause serious injury.
3. Slide the assembled drawer to the rack cabinet from
the front and insert the two slide rails of the assembled
drawer into the pockets of the rear brackets.
4. Fasten the assembled drawer onto the front brackets
by four screws.