Specifications

Live Recording Guide36
3 If you do not have any Snapshots, do the fol-
lowing to create a Snapshot:
• Click New. The new Snapshot appears in
the Snapshots list.
• Click the channels you want affected when
the Snapshot is later recalled so that they
are scoped. Scoped channels are displayed
in red.
• For each parameter of the scoped channels,
click the corresponding Data Type button
so that it is scoped. Scoped parameters are
displayed in red.
• Double-click the Snapshot name, enter a
name for the new Snapshot, and press En-
ter on the keyboard.
4 Do the following to create the Snapshot with
live Stage inputs active:
• Create a new Snapshot and name it.
– and –
• In the Scope section of the Snapshots page,
click the In and PRE Data Type buttons to
scope only the input patching and the in-
put gain settings for the scoped input chan-
nels. Deselect any other scoped Data Type
buttons. Only the IN and PRE buttons
should be displayed in red.
Use this Snapshot to restore Stage input gains af-
ter the Virtual Soundcheck. All other changes
made to your mix carry over when switching be-
tween Snapshots.
Scoping the input channels
Data Type Scope buttons default state
Naming a Snapshot
Naming a Snapshot
Scoping the IN and PRE parameters