CONNEX ProSight Installation and Operation Guide Copyright © 2016 Amimon LTD, All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical or otherwise without prior written permission of Amimon LTD.
CONNEX ProSight Installation and Operation Guide Home Page| Navigation pane Home Page Home Page Home Page Safety Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application Specifications Appendices Safety Instructions Potential Hazards Introduction to CONNEX ProSight Overview Quick Installation Layout Opening the Package HD Receiver Accessories HD Transmitter Ac
CONNEX ProSight Installation and Operation Guide Safety|Safety Instructions Navigation pane Safety Home Page Safety Instructions Safety Introduction to CONNEX ProSight • Do not open the HD transmitter or HD receiver enclosures. There are no user-serviceable parts inside. Refer servicing to qualified service personnel only. The use of controls, adjustments or procedures other than those specified in this user guide may result in exposure to shock and/or electrical or mechanical hazards.
CONNEX ProSight Installation and Operation Guide Safety|Potential Hazards Navigation pane Potential Hazards Home Page The CONNEX ProSight HD transmitter and HD receiver contain HD wireless video module devices that should be operated according to the same rules and limitations applicable to normal HD wireless video module devices.
CONNEX ProSight Installation and Operation Guide Introduction to CONNEX ProSight|Overview Navigation pane Introduction to CONNEX ProSight Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Overview CONNEX ProSight is the missing link needed in a new era in FPV racing. CONNEX ProSight transforms FPV drones into a completely new kind of immersive experience for beginners and experts alike.
CONNEX ProSight Installation and Operation Guide Introduction to CONNEX ProSight|Quick Installation Layout Navigation pane Quick Installation Layout Home Page Safety 1.Connect camera Introduction to CONNEX 3. Connect to flight 4. Connect transmitter power controller 2.
CONNEX ProSight Installation and Operation Guide Opening the Package|Quick Installation Layout Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Opening the Package Verify that the ProSight package contains the following items: • HD receiver • HD transmitter • HD HDR camera, mount and dampers • Spacers and screws • All cables and antennas as detailed in the following sections Configuration Using ProSight Desktop Application Confi
CONNEX ProSight Installation and Operation Guide Opening the Package|HD Receiver Accessories Navigation pane Home Page HD Receiver Accessories Name Description Safety Introduction to CONNEX ProSight Opening the Package HDMI Cable AMN_CBL_036A HD receiver Standard HDMI Cable (Type A to Type A) Connects the HD receiver to a video monitor or FPV goggles. HD Receiver Power Cable AMN_CBL_038A A non-splitter cable (DC Jack to XT-60 connector).
CONNEX ProSight Installation and Operation Guide Opening the Package|HD Transmitter Accessories Navigation pane Home Page HD Transmitter Accessories Name Description Safety Introduction to CONNEX ProSight Opening the Package Installing the Units HD Transmitter Antennas AMC_ACC_018 2 antennas, pre-assembled in the antenna bracket, connected to the HD transmitter.
CONNEX ProSight Installation and Operation Guide Opening the Package|HD Transmitter Accessories Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Name Description HD Transmitter Power Cable Connects the HD transmitter to an external power source. AMN_CBL_030A Camera Cable AMN_CBL_65 Connects the camera and the HD transmitter.
CONNEX ProSight Installation and Operation Guide Installing the Units|HD Transmitter Accessories Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units The following sections describe the mechanical installation and wiring of ProSight system parts: • Connecting Components to Drone • Installing the HD Receiver • Wiring the HD Receiver Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mob
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Connecting Components to Drone Home Page Preparing the Mounting Plate Safety Mark mounting holes for the following components: • Camera (1) – 3 holes Introduction to CONNEX ProSight Opening the Package Installing the Units • Transmitter (3) – 4 holes • Antenna (4) – 4 holes Notes: Operating the Units • Consider the Camera Cable length (2 3/4inch / 7cm) between the camera and the tr
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Attaching the HD Transmitter Home Page The following procedure describes HD transmitter installation. Safety Introduction to CONNEX ProSight 1. Connect the 4 mounting bases (1) to the mounting plate using 4 screws (2).
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units 3. Connect the HD transmitter to the mounting bases using 4 screws (1). Flight direction Note: 1 Notice the transmitter orientation. The video connector (2) should face the camera and the antenna sockets (3) must remain exposed.
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Mounting the Camera Home Page Mount the camera on the front of the drone mounting plate. The rubber vibration dampers serve as shock absorbers and help reduce the “Jello” effect in the incoming video. Safety Introduction to CONNEX ProSight Opening the Package 1. Insert the rubber dampers (3) through the mounting holes in the camera base (2) and in the drone mounting plate (1).
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane The camera can be adjusted or flipped: Home Page 3. Release the two screws (1). Safety 4. Set the angle of the camera or flip it 1800, and fasten the two screws (1). Introduction to CONNEX ProSight Opening the Package Installing the Units Tip: The camera image can also be flipped by applying an OSD 1 2 1 1 command (see Flipping the Camera Image).
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Wiring and Installing the Antenna Home Page This section reviews the tasks associated with installing and wiring the HD Transmitter Antennas. Safety Introduction to CONNEX ProSight Opening the Package Tip: If you decide to design your own antenna fixture, we recommend following the CONNEX ProSight Antenna Guidelines 1.0.
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane 2. Place the antenna on the rear side of the drone mounting plate. Home Page 3. Fasten the antenna base to the drone with four screws (1) using Safety Introduction to CONNEX ProSight Opening the Package washers (2) and nuts (3). Tip: 1 The antenna can be connected to the drone using zip ties instead of screws.
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane Wiring the HD Transmitter Home Page This section reviews the tasks associated with wiring the HD transmitter.
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane B- Home Page Wiring the Telemetry Cable Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application Connecting to Flight Controller Connect the CC3D Telemetry Cable or the Naze Telemetry Cable to the HD transmitter telemetry port (1) and the other end as t
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane Configuring a Flight Controller that Runs CleanFlight Home Page Note: Safety The flight controller must support MAVLink. Introduction to CONNEX ProSight Opening the Package The flight controller has a specific UART port that supports MAVLink. To receive telemetry information from the flight controller, the MAVLink port needs to be configured through CleanFlight as follows: 1.
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane OSD Information Delivered from the Flight Controller Home Page Telemetry information delivered from the flight controller includes: • Flight duration – time starts counting when the drone is armed Safety Introduction to CONNEX ProSight Opening the Package • Heading » When GPS is available – displays heading » When GPS is unavailable – displays yaw Installing the Units • Battery capacity –
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane C- Home Page Connect the HD Transmitter Power Cable to the HD transmitter power socket (1) and the other end to the power source. Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Connecting to a Power Source 1 Notes: • Be sure to connect the red wire to the positive pole and the black wire to the negative pole of the power source.
CONNEX ProSight Installation and Operation Guide Installing the Units|Installing the HD Receiver Navigation pane Installing the HD Receiver Home Page This section reviews the tasks associated with installing the HD receiver. Safety A- Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Connecting Antennas To connect the HD Receiver Antennas to the HD receiver: 1.
CONNEX ProSight Installation and Operation Guide Installing the Units|Installing the HD Receiver Navigation pane B- Home Page Fasten the case to the HD receiver.
CONNEX ProSight Installation and Operation Guide Installing the Units|Installing the HD Receiver Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package C- Mounting the HD Receiver 1. Place the HD receiver as high as possible on a tripod, pole or any other mounting device. A height of 2 meters off the ground is optimal. 2. Place the HD receiver so that its antennas are facing upwards in the general direction of the drone’s flight.
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Receiver Navigation pane Wiring the HD Receiver Home Page This section describes the required wiring for the HD receiver. Safety A- Introduction to CONNEX ProSight Opening the Package Installing the Units Connecting to FPV Goggles/Monitor To display the received video, connect the HDMI Cable to the HD receiver HDMI port (1) and the other end to the FPV goggles/monitor HDMI port.
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Receiver Navigation pane B- Home Page To connect the HD receiver to a power source: Safety Introduction to CONNEX ProSight Connecting to Power 1. Connect the HD Receiver Power Cable to the HD receiver power port (1) and the other end to a power source.
CONNEX ProSight Installation and Operation Guide Operating the Units|Wiring the HD Receiver Navigation pane Home Page Safety Introduction to CONNEX ProSight Operating the Units The following sections describe the basic functions of the CONNEX ProSight: • Pairing HD Transmitter and Receiver • OSD Control Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application Specifications Appendices Doc P/N: 9040962 |
CONNEX ProSight Installation and Operation Guide Operating the Units|Pairing HD Transmitter and Receiver Navigation pane Pairing HD Transmitter and Receiver Home Page This section describes the procedure for pairing an HD receiver with an HD transmitter. CONNEX ProSight units are already paired when delivered. The pairing process is required when connecting to an unpaired HD transmitter for the first time. Safety Introduction to CONNEX ProSight Opening the Package 1.
CONNEX ProSight Installation and Operation Guide Operating the Units|Pairing HD Transmitter and Receiver Navigation pane Home Page Safety 3. Verify that the Network LED (1) on the HD receiver blinks for a few seconds and is lit constantly when pairing is completed. This process takes a few seconds.
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane OSD Control Home Page Unit configuration is performed via the on-screen display (OSD) setup menu. The following section describes OSD control and functionality. Safety Introduction to CONNEX ProSight Prerequisite • Verify that the HD receiver is powered on. Opening the Package • Verify that the HD receiver is paired with the HD transmitter (see Pairing HD Transmitter and Receiver).
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane Navigating in OSD Menus Home Page Use the following buttons on the HD receiver are used for navigating through the OSD menu options: • NEXT (1) Safety Introduction to CONNEX ProSight Opening the Package • SEL (2) • MENU (3) Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application 1 2 3 Specifications Appendices Doc P/N:
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane HD receiver button functionality: • NEXT (1) – moves the cursor between menu options. Home Page Safety • SEL (2) – selects the marked option. Introduction to CONNEX ProSight • MENU (3) – displays the main menu or turns the OSD the main menu OFF.
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane Switching between OSD Modes Home Page Clicking the MENU button (1) toggles between the following OSD display modes: » OSD Telemetry (2) – displays the selected OSD viewing mode (see Setting OSD Safety Introduction to CONNEX ProSight Overlays) » OSD Menu (3) – initiates OSD programming and displays the Main Menu 2 3 Opening the Package Installing the Units Operating the Units .W.I.N.I.
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane OSD Menu Interface Home Page A typical menu interface includes the following: • Menu title line (1) Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application 1 • Menu items – up to 4 items can be displayed at a time. 2 » Cursor (2) – indicates a selection point.
CONNEX ProSight Installation and Operation Guide Operating the Units|Main Menu Navigation pane Main Menu Home Page The main menu includes the following sub-menus: • Search Drone – enables Connecting to Transmitter Safety Introduction to CONNEX ProSight Opening the Package Installing the Units • Frequency Mode – enables Frequency Management • Recorder Status – displays the status of the recorder (grayed out when the recorder is not connected) • Setup – enables settings configuration (see Setup Menu) O
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Setup Menu Home Page To display the Setup menu, select Main Menu > Setup.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Connecting to Transmitter Home Page This section reviews the tasks associated with connecting to the paired HD transmitter (located on your drone) or to transmitters on other drones. Safety Introduction to CONNEX ProSight Connecting to My Drone: To connect to your paired HD transmitter: Opening the Package 1.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Home Page Safety Connecting to Other Drones To connect as a viewer to an HD transmitter located on another drone: 1. Select Main Menu > Search Drone > Other Drones. Introduction to CONNEX ProSight 2. Select an HD transmitter from the displayed list of available drones. Opening the Package • Unavailable transmitters are grayed out. Installing the Units • Select Back to return to the Main Menu.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Frequency Management Home Page CONNEX ProSight is a digital system, allowing bi-directional communication between the HD transmitter and its paired HD receiver. When the HD receiver is connected to a transmitter as a viewer (see Connecting to Other Drones), frequency management is disabled.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Selecting Frequency Mode via OSD Home Page Tip: Safety Frequency management is possible only when the HD receiver is connected to its paired HD transmitter. Introduction to CONNEX ProSight To select frequency mode: Opening the Package 1. Select Main Menu > Frequency Mode. Installing the Units 2.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Auto Home Page In Auto mode, the system constantly searches for the optimal frequency. When the system detects interference with the current frequency, it instructs both the transmitter and receiver to seamlessly switch to an alternative frequency. This change is done instantly, without any visual effect or video degradation.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Fixed frequency Home Page This option enables selecting from a list of frequencies (the list changes according to region). Once a certain frequency is selected, the HD transmitter uses the selected frequency only. In this mode, the system does not change its frequency, even when communication is lost nor when if it detects interference with other systems.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setup Menu Options Home Page Viewing Status Safety To view the communication status, select Main Menu > Setup > Status.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setting Regional RF Home Page To select a regional radio frequency mode: Safety 1. Select Main Menu > Setup > Regional RF. Introduction to CONNEX ProSight 2. Select a mode from the displayed list. Opening the Package Installing the Units For the full Regional RF mode list according to location, see Regional Frequency Specifications.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setting Power Alert Threshold Home Page To manage battery power and to set the power alert threshold: Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application 1. Select Main Menu > Setup > Power Alerts. The displayed list changes according to the used battery settings.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setting OSD Overlays Home Page This section reviews the overlay displayed on top of the video image.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Selecting Viewer Overlay Home Page To set the viewing mode when connected as a viewer: Safety 1. Select Main Menu > Setup > OSD > Other drone. Introduction to CONNEX ProSight 2. Use the SEL button to toggle between the following overlays:.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Detailed Overlay Home Page The Detailed overlay displays the following information on top of the live video: Safety Introduction to CONNEX ProSight Opening the Package 1 TX_1 5 02m45s AUTO 2 3 • Transmitter name (1) • Frequency mode (2) • Signal level (3) – there are three levels: Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using Pro
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Race Overlay Home Page The race overlay displays the following information on top of the live video: • Flight duration (1) Safety Introduction to CONNEX ProSight • Battery voltage (2) Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application Specifications Appendices 1 02m45s 1 TX_1 15.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Managing Bluetooth Communication Home Page Viewing Bluetooth Pairing Code Safety Introduction to CONNEX ProSight Opening the Package Installing the Units The bluetooth pairing code is used to connect to the HD receiver or the HD transmitter with a mobile device via bluetooth. To view the code, select Main Menu > Setup > Bluetooth. The code is displayed in the Bluetooth menu under Pairing Code (1).
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Flipping the Camera Image Home Page This option is relevant when the camera is installed upside down. To flip the displayed video vertically 180˚, select Main Menu > Setup > Camera > Flip Video. Each selection of the Flip Video option, flips the image 180˚. Safety Introduction to CONNEX ProSight Opening the Package Tip: Installing the Units Select Back to return to the Main Menu.
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Setting Video Mode 1. Select Main Menu > Setup > Camera > Video Mode. 2. Select one of the following modes: • High Quality – 720p 30 HD video • High Performance – 720i 60 HD video For more information on video modes, see High Quality Mode and High Performance Mode.
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Desktop Application|Prerequisite Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application Configuration Using ProSight Desktop Application This chapter describes the CONNEX ProSight mobile application and includes: • Installing the Desktop Application • Connecting t
CONNEX ProSight Installation and Operation Guide ConfigurationUsingProSightDesktopApplication|ConnectingtotheHDTransmitterandReceiver Navigation pane Connecting to the HD Transmitter and Receiver Home Page Start the ProSight desktop application. When starting the application, and before communication is established, the application displays a NO USB CONNECTION message.
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Desktop Application|Upgrading Firmware Navigation pane Upgrading Firmware Home Page Tip: Safety Before performing firmware upgrade, connect to the Internet. Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units When a newer firmware version is available, the UPGRADE button (1) appears. To upgrade the firmware of the connected ProSight device, click the UPGRADE button (1).
CONNEX ProSight Installation and Operation Guide ConfigurationUsingProSightDesktopApplication|RestoringFactoryConfigurationSettings Navigation pane Restoring Factory Configuration Settings Home Page To revert to the default factory settings, click the RESTORE button (1). Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application 1 A dialog box is displayed.
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Initial Setup Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application Configuration Using ProSight Mobile Application CONNEX ProSight can be configured using the CONNEX RMT mobile application.
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Home Screen Overview Navigation pane Home Screen Overview Home Page The following information is displayed on the home screen: • Connection status (1) Safety Introduction to CONNEX ProSight • Paired HD receiver name (2) – tap the information icon next to the receiver name to display the device parameters (see Viewing Device Parameters).
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Viewing Device Parameters Navigation pane Home Page Safety Viewing Device Parameters Tapping on the information icon next to the receiver name (1) displays the following device parameters: • Firmware (2) – HD receiver firmware version. Introduction to CONNEX ProSight • TX Name (3) – HD transmitter name. Opening the Package • BLE Name (4) – Bluetooth Low Energy HD receiver name.
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Main Menu Options Navigation pane Main Menu Options Home Page The name of the connected unit (1) appears at the top of the Main Menu.
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Main Menu Options Navigation pane Using the OSD Swipe Controller Home Page The OSD Swipe Controller enables controlling and navigating in the OSD on the connected monitor or FPV goggles (see Navigating in OSD Menus). The application swipe commands replace the need to use the HD receiver control buttons (see Navigating in OSD Menus).
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Main Menu Options Navigation pane Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Frequency Management Tip: Frequency management is available only when the HD receiver is connected to its paired HD transmitter. To set the frequency mode, tap one of the following modes: • Auto (1) – constantly searches for the optimal frequency.
CONNEX ProSight Installation and Operation Guide Specifications|CONNEX ProSight Navigation pane Specifications » Micro USB – Connection to application; Wired pairing CONNEX ProSight » Proprietary MIPI (14 pin Right-Angle, JST SM20B-SRSS) – HD Video input Home Page Safety Introduction to CONNEX ProSight • Supported LOS range of 1000ft without any range limitation • Advanced High-Definition spectator viewing mode » UART for Telemetry • Environmental: • Receiver Unit outputs standard 720p60 over HDMI
CONNEX ProSight Installation and Operation Guide Specifications|HD Receiver Navigation pane Home Page HD Receiver • Power consumption ~5Watt Safety • Power input: 7v-17v; Support 2S to 4S batteries; Reverse polarity protected Introduction to CONNEX ProSight • Antennas – 5 antennas (short SMA connectors) Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application Specifications Appendices • Dimensions –
CONNEX ProSight Installation and Operation Guide Appendices|ProSight Delay-Free HD Camera Navigation pane Appendices Home Page Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProSight Mobile Application Specifications Appendices ProSight Delay-Free HD Camera The CONNEX ProSight Delay-Free HD camera is optimized for both indoor and outdoor flights, featuring advanced High-Dynamic-Range
CONNEX ProSight Installation and Operation Guide Appendices|ProSight Delay-Free HD Camera Navigation pane Technology and Output Home Page Opening the Package The ProSight HD camera is connected to the ProSight transmitter via a MIPI interface. This is an HD dedicated video interface with no additional processing delay between the camera and the transmitter. Both the HD transmitter and the HD receiver utilize enhanced MIMO technology.
CONNEX ProSight Installation and Operation Guide Appendices|CONNEX ProSight Antenna Guidelines Navigation pane CONNEX ProSight Antenna Guidelines Home Page We recommend following these guidelines when using a CONNEX ProSight antenna array or designing your own array. For HD transmitter antenna installation instructions, see Wiring and Installing the Antenna.
CONNEX ProSight Installation and Operation Guide Appendices|CONNEX ProSight Antenna Guidelines Navigation pane Line of Sight Home Page RF signals are obstructed, absorbed and reflected by physical obstacles on their path. Best performance of the drone can be achieved by using a clear line of sight setup. However, the drone’s body can be an obstacle to the RF signal, if placed between the transmitting and receiving antennas.
CONNEX ProSight Installation and Operation Guide Appendices|CONNEX ProSight Frequency Management Navigation pane CONNEX ProSight Frequency Management Home Page Frequency Management Tools Safety The ProSight frequency management scheme was designed to observe four constraints: • Regulatory requirements - regional settings and HAM license Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using ProSight Desktop Application Configuration Using ProS
CONNEX ProSight Installation and Operation Guide Appendices|CONNEX ProSight Frequency Management Navigation pane Automatic Frequency Selection Home Page When using Auto mode, the system automatically selects the most suitable channel to work on from all available • The number of available frequencies varies according to regulations and sub region settings. Safety frequencies.
CONNEX ProSight Installation and Operation Guide Appendices|Regional Frequency Specifications Navigation pane Regional Frequency Specifications Home Page The ProSight system operates over the full span of the 5GHz unlicensed band. Ranging from 5150MHz to 5925MHz, the system has a total of 62 different center frequencies to operate on. ProSight systems are shipped with regional settings that meet the regulatory requirements of the region they are sold in.
CONNEX ProSight Installation and Operation Guide Appendices|Regional Frequency Specifications Navigation pane Regional Frequency Table Home Page Safety Introduction to CONNEX ProSight Region Channels US FCC 8 Recommended center frequencies Pro-A Pro-B Pro-C 5740 5760 5780 5800 5820 Pro-A Pro-B Pro-C 5665 5685 5705 5740 5760 5800 5820 5840 5860 5880 5900 5920 5780 US HAM 16 EU SRD 7 5740 5760 5780 5800 5820 5840 5860 EU Indoor 8 5175 5195 5215 5235 Pro-A Pro-B
