User Manual

Doc P/N: 9040962 | Rev 01 | Printed 22 July 2016
24
CONNEX ProSight Installation and Operation Guide
Installing the Units|Installing the HD Receiver
Navigation pane
Installing the HD Receiver
Home Page
Safety
Introduction to CONNEX
ProSight
Opening the Package
Installing the Units
Operating the Units
Configuration Using
ProSight Desktop
Application
Configuration Using
ProSight Mobile
Application
Specifications
Appendices
This section reviews the tasks associated with installing the HD receiver.
A- Connecting Antennas
To connect the HD Receiver Antennas to the HD receiver:
1. Connect the five antennas (1) to the five antenna connectors (2).
2. To avoid interference, place the HD receiver Antennas as far as
1
2
possible from other transceiver devices, especially transmitters in
the 5 GHz band.
Notes:
• For configuration purposes: the distance between the receiver and its paired transmitter should be 1–10 meters.
• When using multiple ProSight units in the same area:
– The distance between two adjacent receivers should be at least one meter.
– To avoid interference, verify that the distance between your receiver and other transmitters is at least four meters.