User Manual

Doc P/N: 9040962 | Rev 01 | Printed 22 July 2016
64
CONNEX ProSight Installation and Operation Guide
Configuration Using ProSight Mobile Application |Main Menu Options
Navigation pane
Frequency Management
Home Page
Safety
Introduction to CONNEX
ProSight
Opening the Package
Installing the Units
Operating the Units
Configuration Using
ProSight Desktop
Application
Configuration Using
ProSight Mobile
Application
Specifications
Appendices
To set the frequency mode, tap one of the following modes:
• Auto (1) – constantly searches for the optimal frequency.
• Fixed –
» ProSight Bands (2) – enables selecting a race set. Each set
consists of two frequencies within the DFS spectrum. The system
scans to verify that there is no interference with other devices
and will switch between the two frequencies when required.
» Fixed frequency (3) – lists fixed frequencies for manual
selection. Once a certain frequency is selected, the HD
transmitter uses only the selected frequency.
For more information on Frequency Management, see CONNEX ProSight
Frequency Management.
Tip:
Frequency management is available only when the HD receiver is
connected to its paired HD transmitter.
1
2
3