Installation manual

102 20/10/2004 PS10270JENAA01
Viewing the system ID
The system identification number, or ID, is given on a label on the left panel of the main cabinet
and on the OCT4 main card. It is also stored in the removable i-Button software dongle.
Record the system identification code in the Programming Record. It will be useful if you need to
restore an upgraded system after a system restart.
The system ID can be viewed at any time during a programming session by following these
steps:
1 Go to menu 3.8.1 (Unlock SA functions). The screen SELECTION OF THE SA
FUNCTION
appears.
2 Press Enter. The screen UNLOCK< FUNCTION NAME> appears.
The line ID NUMBER displays the system ID number. Record this code in the Programming
Record.
Note: Before you program the site data, read the information below and copy it to the
Programming Record.