Installation manual

104 20/10/2004 PS10270JENAA01
Programming steps
1 Go to menu 4.6.2. (External line status); the screen SELECTION OF A STATUS TO
MONITOR
appears.
2 On the line STATUS SEARCHED, you can select a status.
3 On the line ON TRUNK GROUP, you can select a trunk group.
4 On the line FIRST PHYSICAL EQUIPMENT, select an equipment number (if applicable).
The external trunk lines on the trunk group are displayed starting with the first position
indicated.
5 Press Enter. The display screen appears:
Menu Comments
EQT ACCESS
the card, equipment, access number, trunk group, and call distribution service (if the
COMPANY/DEPARTMENT (multi-company) function is validated);
the access number is used for programming the keys on digital telephones to monitor
external lines
TK GR
the name of the trunk group linked with the line
STATUS
line status:
IT.PH
indicates the physical interval, or time slot (TS) associated with the line