Installation manual

106 20/10/2004 PS10270JENAA01
Programming steps
1 Go to menu 1.1.6 (Extension Directory). The screen EXTENSION DIRECTORY appears.
2 Enter the menu number that you need (as shown in the table above). Press ENTER. The
screen of your selection appears.
1.1.6.6
DISPLAY INTERCOM
GROUPS
To access this screen, on the line GROUP SELECTION, enter the number of
the intercom group to be displayed and press Enter. The system displays a
list of all the directory numbers that belong to the group.
This option shows:
DN: the extension directory number
NAME: the extension user name
COMPANY: name of the user home company (for multi-company
configuration)
DEPT: name of the company department (for multicompany configuration).
1.1.6.7
DISPLAY FEATURES
This option shows, among other details:
BELONGS TO HUNT GROUP X: number of the group to which the extension
belongs
BELONGS TO ANNOUNCEMENT X: number of the announcement list to
which the extension belongs
1.1.6.8 OTHER
DISPLAY
1.1.6.8.1 DISPLAY SUBSTITUTE SETS
This option shows:
SUBSTITUTE: substitute set number and start of name of substitute set
SUBSTITUTED: substituted extension site and substituted set directory
number
1.1.6.8.2 LOCATION OF SUBSTITUTED SETS
This option shows:
SUBSCRIPTION: substituted set number and start of name of substituted
set
SUBSTITUTED BY: substitute extension site and substitute set directory
number
1.1.6.8.3 DISPLAY EMERGENCY CALLBACK SETS
Note: This menu is only for USA configuration USA.
This option shows:
DN: Shows the directory numbers (in ascending order) of the sets declared
as emergency callback sets.
NAME: Shows the names of the users.
IP SUBNET: Shows the first IP subnet using this set. If the information
declared is consistent between the subscriber sites and the site where the
CAC server is located, the "IP subnet" field should be up-to-date.
Menu Comments
- Folio 2 de 2 -