Installation manual

PS10270JENAA01 20/10/2004 107
View extension status
Description
The system displays the status of telephone sets after a "total" reinitialisation on the basis of two
criteria: the set status (see the list of statuses in the table below) and/or a directory number.
.
Programming step
1 Go to menu 4.6.1 (Status of extensions). The screen SELECTION OF A STATUS TO
MONITOR
appears.
2 Select a status (see table above) on line SEARCHED STATUS. Press Enter. The display
screen appears.
, Select ANY to view all the extensions
3 On the DIRECTORY BEGINNING WITH line, enter a digit (or number). All sets with directory
numbers that start with this digit (or number) are displayed.
4 When you have selected the search criteria, press Enter to confirm. The following
information is displayed for each set: directory number, set equipment number in the PBX,
set type and status.
Status Comments
ANY
list of all phones in all statuses
FREE
list of all phones in service and free
PERMNT.
list of all sets with a call set up
BUSY.UNSTABLE
list of all phones dialling
PERM. OFF-HOOK
COND
list of all analogue sets off-hook and/or digital sets not
connected
OUT OF SERVICE
list of all sets taken out of service using an MMC
DISCONNECTED
ist of all non-localised sets or subscriptions