Installation manual

108 20/10/2004 PS10270JENAA01
View IP subscriber status
Description
The system displays all IP sets declared on the site on the basis of several criteria (set type, status of
set's application session, directory number
Programming steps
1 Go to menu 4.6.1.2 (IP subscribers status). The screen APPLICATION STATUS
SELECTION appears.
2 On the line TYPE OF SET select the IP set type you want. Only those IP sets of the type
selected declared on the site will be displayed.
, To display all the IP sets (IP DS, TD PC and ETHERSET) declared on the site, select "……..".
3 On the line APPLICATIVE SESSION, select the set's application session status. Sets
whose application session status is the same as the status selected will be displayed.
, To display all sessions, select "……..".
4 On the DIRECTORY BEGINNING WITH line, enter a digit (or number). All IP sets declared on
the site with directory numbers that start with this digit (or number) will be displayed.
5 When you have selected the search criteria, press Enter to confirm. The following
information is displayed for each IP set: directory number, set model, session status, CAC
centre, CAC class number, site number, cluster, processor number of CLX card, IP address,
UDP port number and location number (number of emergency callback set, only displayed
for a USA configuration).
Type of set Comments
IP DS
IP circuit: digital set with IP cartridge (i760, i780) and i740 (IP
native set)
TD PC
IP circuit: Software phone application on PC
ETHERSET
IP circuit: Internet telephone