Installation manual

114 20/10/2004 PS10270JENAA01
6 Connect the line or extension to the distribution frame.
7 Power on the M6501L/R IP PBX.
8 Put the card in service :
Go to menu 3.2 (Card management). On the line corresponding to the card slot, select the
appropriate parameter.
9 On the line
STATUS, select IN SERVICE. Press Enter to confirm. Wait a few seconds.
If the card state changes to
FAULTY, check:
• that the card is inserted correctly
• that the selected slot is suitable
• that the card type selected matches the card properties
10 Program the card.
With a subscriber card, assign a directory number to each extension and put all the
extensions into service (menu 1.1.1- Extension characteristics).