Installation manual

PS10270JENAA01 20/10/2004 127
•Type MENU and validate by pressing Enter. The window PC TOOLS SELECTION
appears.
• In the
PC TOOLS SELECTION window, select the line VUS INSTALLATION ON PC
• Validate the selection by pressing Enter.
Note: The name of the screen changes to:
INSTALLING THE VUS ON THE
HARD DISK.
• Insert the Chaining diskette into drive A and press Enter twice.
5 The proposed installation directory is C :\vu_F1. If this directory is suitable, press Enter to
confirm the creation of this directory.
At the same time all the diskettes that can be transferred are displayed on the screen.
• When the message
SELECT THE FLOPPY DISKS TO TRANSFER is displayed on
the screen, select MAJ PAS (PAS update) using the arrow keys. Press Ins to validate
the choice of diskettes. Validate by pressing Enter.
• When the message
CONFIRM SETTINGS? is displayed on the screen, press Enter.
The message
TRANSFER IN PROGRESS !!! is displayed.
• At the message
INSERT THE FLOPPY DISK <FLOPPY DISK NAME>, remove
the Chaining diskette and insert the first diskette to be transferred. Validate by pressing
Enter. The message
INSERT THE FLOPPY DISK <FLOPPY DISK NAME> is
displayed for each diskette to be transferred.
• The message
INSTALLATION COMPLETE !!! signals the end of the installation.
Press ESC to return to the
PC TOOLS SELECTION screen. Remove the diskette to be
transferred.
You are advised to continue the procedure from step "6 : Running the VUs" without exiting
the"DOS Tools" program.
6 Running the VUs (Updating the customer configuration)
On the PC, in Windows:
• If the software is supplied on diskettes, insert the Chaining diskette in the floppy drive.
• If the software is supplied on CD-ROM, insert the CD-ROM in the CD-ROM drive.
Note: If the
PC TOOLS SELECTION window is already displayed, ignore the first three
steps.
• Open an MSDOS window.
•Go to C:\OUTIPC.
•Type
MENU and validate by pressing Enter. The window PC TOOLS SELECTION
appears.
•In the
PC TOOLS SELECTION window, select the line PROCESSING VUS. Press
RETURN to confirm.
Note: The name of the screen changes to:
CUSTOMER CONFIGURATION
UPDATING
.