Installation manual

144 20/10/2004 PS10270JENAA01
Correspondence between slots and MMCs
The address of a device on a card comprises two physical addresses and a logical address.
The first address is the number of the shelf in which the card is fitted.
The second address is the number of the slot in which the card is fitted.
The third address is given by the MMC which assigns an equipment number.
Example:
• if a CA1 card is installed in shelf 0 of the main cabinet in position 3, its address will be < 0 > -
< 3 > - < equipment number (0 to 3) >
• if a CA1 card is installed in shelf 1 of the main cabinet in position 4, its address will be < 1 > -
< 4 > - < (0 to 3) >