Installation manual

154 20/10/2004 PS10270JENAA01
J3 connector
DECT primary synchronisation port.
J6 connector
DECT secondary synchronisation port.
J9 connector
This connector has four alarm input pins (AL0 to AL3) and four control relays (R1 to R4).
Contact Textual specification Contact Textual specification
1 AHGA Clock out of range alarm 5 HDECT1+ DECT synchro
2 AHGB not used 6 HDECT1-
3 HBIT1+ 2.048MHz bit clock 7 HEXTA not used
4 HBIT1- 8 HEXTB
Contact Textual specification Contact Textual specification
1 AHGA Clock out of range alarm 5 HDECT2+ DECT synchro
2 AHGB not used 6 HDECT2-
3 HBIT2+ 2.048 MHz bit clock 7 HEXTA not used
4 HBIT2- 8 HEXTB
Contact Textual specification Contact Textual specification
9 AL2 (alarm input 2) 1 AL3 (alarm input 3)
10 AL0 (alarm input 0) 2 AL1 (alarm input 1)
11 R2C (break contact of the K2 relay) 3 GND
12 R4A (make contact of the K4 relay) 4 R4B (make contact of the K4 relay)
13 R3A (make contact of the K3 relay) 5 R3B (make contact of the K3 relay)
14 R2A (make contact of the K2 relay) 6 R2B (make contact of the K2 relay)
15 R1A (make contact of the K1 relay) 7 R1B (make contact of the K1 relay)
16 12 V 8 GND