Installation manual

164 20/10/2004 PS10270JENAA01
Description of the connectors
Description of the switches
The CA1 double switch enables the flash memory to be programmed using the BOF3 tool card:
OFF: Normal mode (factory setting)
ON: Programming mode
Pushbuttons:
SW1: Reset
SW2: NMI (Non-maskable interrupt)
NAME Function
Description of the
contacts
J2 RJ45 connector: Connection to the
IEEE 802.3 LAN
1- TPTX+
2- TPTX-
3- TPRX+
4- NC.
5- NC.
6- TPRX-
7- NC.
8- NC.
J3 HE14 2X5 pin connector. Used to
connect a VT100 console or PC
(debug).
Not used
J4 HE14 1x8 pin connector. "In situ"
programmable component loading.
Not used
J5 HE14 2 x 6-pin connector.
Used to connect a JTAG emulator.
Not used
J6 and J7 2x40 pin and 2x20 pin connectors.
Location of the VOIP4 or VOIP4E
daughter card.
Not used
1
A B
A B
1
2
3
5
4
1
2
3
5
4
21 40
120