Installation manual

22 20/10/2004 PS10270JENAA01
Tree structure
The man machine commands (MMC) are set out in the form of tree structured menus.
You can progress through the tree structure by entering information at each level. There is also a
special command to move back a level.
Menus
A menu consists of a menu name, lines, and a box indicating keystroke commands (delete, line
feed, etc.).
A menu can be composed of one or more screens. In multi-screen menus, the titles and boxes
are repeated on each successive screen.
Commands are displayed at the foot of each menu. These are provided to make your work
easier.
Passwords
To access a menu family, enter one of the five passwords associated with the family concerned.
This will define your data access rights. You may have normal access or protected access to the
data entry fields (each field is displayed on one line). Types of access are defined in the
software.
To access the DATA MANAGEMENT menu family, enter one of the five passwords associated
with this family. Your access rights are now defined. Depending on the password entered, you
will have one of the following sets of rights:
• complete read access / complete write access
• complete read access / write access in normal-access fields
• complete read access / no write access
• read access in normal-access fields / write access in normal-access fields
• read normal-access fields / no write access
To access the OPERATION ADMINISTRATION menu family, enter one of the three passwords
associated with this family. Your access rights are now defined:
• compete read access / no reset allowed
• complete read access / reset of charging meters allowed
• complete read access / reset of charging meters and logbook allowed
The INSTALLER DATA family has only one password.