Installation manual

234 20/10/2004 PS10270JENAA01
20D There is an incorrect PAS type file parameter.
(INDEX = fault code AGD).
the AGD number of the accessed table: 1 byte
the logic cluster number
the number of the PAS file AGD descriptor: 1 word
*1 word is displayed as 2 inverted bytes.
3=IRMX286 primitive call problem.
5= AGD internal fault: internal file full, incorrect message code in AGD message
6=BASIC I/O call problem
7=no resources (memory space), GEDI primitive call problem
9=fault, transaction duration value too high.
50/5A = fault, inconsistent or missing file
Disk/Mem
51/5B = fault, inconsistent or missing descriptor header
Disk/Mem
52/5C = fault, inconsistent or missing table descriptor
Disk/Mem
53/5D = error, function number parameter incorrect Disk/Mem
54/5E = error, descriptor number parameter incorrect Disk/Mem
55/5E = error, table number parameter incorrect Disk/Mem
56/60 = error, type of table accessed incorrect Disk/Mem
57/61 = error, index parameter incorrect Disk/Mem
58/62 = error, length position parameter incorrect Disk/Mem
Action
Contact the maintenance support team.
20F The CPU software no longer has sufficient memory resources (IRMX objects, memory area).
-the calling IRMX task token: 1 word.
-the IRMX86/286 error code: 1 word.
Note
: The index gives the type of request responsible for the error:
1, 2, 3, 10H: task creation.
4 : mailbox creation,
5, 6 : signalling channel creation,
7 : segment creation,
8 : large memory area,
9 : small memory area.
*1 word is displayed as 2 inverted bytes.
Action
Monitor the error. The system quickly restarts the CPU when this error occurs
Error
number
Description
- Folio 2 de 8 -