Installation manual

PS10270JENAA01 20/10/2004 239
4901 The BS and MB4 cards cannot communicate.
Action
Monitor the error. The system automatically changes the BS status to blocked when this error
occurs.
4902 The communication between the BS card and the LB4 card is restored (after receiving error
4901 h).
Action
Monitor the error. The system automatically changes the BS status to in service when this error
occurs.
6D00 PCM interface on LT2 card is not configured in selected mode.
No action or information for the operator.
Action
The PCM interface of the LT2 card has not been configured in the selected mode.
No action or information for the operator.
6D04 Onset of PCM alarm on an LT2_T1 card.
- frame alarm register (8 least significant bits): 1 word.
- multiframe alarm register (8 least significant bits): 1 word.
1 word is displayed as 2 inverted bytes.
Action
No action or information for the operator.
6D05 The alarm on the PCM of the LT2_T1 card ends.
- frame alarm register (8 least significant bits): 1 word.
- multiframe alarm register (8 least significant bits): 1 word.
1 word is displayed as 2 inverted bytes.
Action
No action, information for the operator.
6D06 Alarm of a blocked junctor on LT2_T1 card PCM.
No action or information for the operator.
6D07 Alarm of a blocked junctor on LT2_T1 card PCM ends.
No action or information for the operator.
6F00 2-channel DECT BS cannot be loaded.
Action
Monitor the error. The system automatically changes the base station status to faulty when this
error occurs.
6F01 2-channel DECT BS cannot communicate.
Action
This error is not displayed in the logbook. The system automatically changes the BS status to
blocked when this error occurs.
6F02 2-channel DECT BS communications are restored (after error 6F01h) or the BS is activated.
Action
This error is not displayed in the logbook. The system automatically changes the BS status to in
service when this error occurs.
Error
number
Description
- Folio 7 de 8 -