Installation manual

242 20/10/2004 PS10270JENAA01
Value
(hex)
Error description
40 Directory name begins with “:” but does not contain a “::” pair.
41 Extended I/O system can no longer transfer the remaining data from the buffer to the output
peripheral.
42 Basic I/O system has insufficient memory space to process the request.
44 Peripheral containing required file not in service.
45 Extended I/O system cannot find the logical name requested in the object directories it
manages.
46 The user currently attempting to detach the peripheral is not the peripheral processor.
47 Extended I/O system cannot create an I/O job because the requested object directory is too
small.
50 Unknown I/O error.
51 I/O soft error. A fresh attempt may be successful.
52 I/O hard error. A fresh attempt is probably pointless.
53 Peripheral out of service. Operator action is required.
54 Volume write-protected.
60 An absolute format program is installed in a protected system memory area.
61 Illegal group component in the Group definition record.
62 Object file with an incorrect header record.
63 Segment definition record incorrect.
64 Checksum error while reading a record.
65 Unexpected EOF when reading file records.
66 File containing an incorrect fix up record.
67 Insufficient memory to meet dynamic loader needs.
68 Insufficient memory to create PIC/LTL segments.
69 Illegal record format.
6A Record length exceeds the defined load buffer size.
6B Incorrect record type.
6C No start-up address.
6D The maximum job size is less than the memory requirements specified in the file.
6E Overlay name does not match overlay module names
6F The defined file loader cannot handle the required load file characteristics.
70 The addres called by a data record loaded by the Application Loader is outside the limits of the
segment created for that record.
80 Analysis buffer contains a literal with no closing quote marks.
- Folio 1 de 2 -