Installation manual

PS10270JENAA01 20/10/2004 31
"T" command: type (display)
This command is used to specify the lines to print in a menu. Up to 16 lines can be selected.
When this command is activated, the number of lines already selected is displayed. Three
options are available:
• E : to erase the selection
•A : to add a line to the selected lines
•D : to reset the selection (= E + A)
If a line is selected several times, it is only printed once.
The lines are printed in the order in which they appear in the menu. The order in which they are
selected is not significant.
"H" command: hardcopy
This key is available in all menus. It is used to print the current menu (the keystroke command
box is not printed).
For multi-screen menus, all screens will be printed. The names of the screens are not repeated.
If the printer is unavailable, an error message is displayed.
Note: This command requires confirmation. You do not have control of the terminal during
printing.
"F" command: find
This command is only available in repetitive menus.
It is used to set a search criterion for a following or previous element. The criterion is a logical
AND equality test on a maximum of three values for fields anywhere in the menu displayed.
When the command is activated, three options are available:
• "E" to erase the criterion
• "A" to add a new criterion
• '"D" to reset the criterion (= E + A).The value required for the field must be entered before
activating the command. Running the command does not confirm the value of the current
field.
"N" command: next element
This command moves the user from one element to another in repetitive menus without returning
to the selection screen.
If you have set a search criterion with the "F" (find) command, you are prompted to confirm. You
can either confirm or cancel the criterion.
If there is no following element, or if you run the command in a menu type other than repetitive,
an error message is displayed.