Installation manual

38 20/10/2004 PS10270JENAA01
• Minimum clearance
You must allow clearance of at least 150 mm (49 ft) above the cabinets and 100 mm
(33 ft) below to allow air to circulate. Also check that there is enough room above the ICS
to reinsert the retaining screw on the top of the cabinet.
• Electrical devices
There must be a minimum distance of 4 m (13 ft) from equipment such as photocopiers,
electric motors, and other equipment that can produce electromagnetic or radio-frequency
interference.
• Fire precautions
A fire extinguishing system (for example, CO2 foam) needs to be in the room.
Environment
• General conditions
The room should be clean, dry, and well-ventilated to allow free airflow.
• Temperature
The temperature of the room must be controlled, and kept between 5 °C (41 °F) and 40 °C
(104 °F).
•Humidity
The degree of non-condensing humidity in the room must remain between 10 % and
80 %. The humidity must not exceed 30 % per hour during operation.