Installation manual

40 20/10/2004 PS10270JENAA01
Equipment checklist
The customer may wish to install existing equipment. To obtain a general idea of the scale of the
new installation, you should make a complete inventory:
Existing equipment
If the customer has equipment to install, draw up a hardware inventory of all the equipment
supplied by the customer and note the detailed information required for programming in the
Programming Record. For example, the customer may supply a common bell device and an
external musical source.
New equipment
Equipment for the new system will be delivered in individual boxes. To complete an inventory of
the delivered equipment, look for the package labeling and enter the details in the Programming
Record.
An example of the labeling on the packages is given below:
Tools for installation
To install the ICS, you will need the ordinary set of tools common to any telephone installation, as
well as the following:
• 1 pair of adjustable pliers for wiring the Stocko insulation-displacement connectors
• 1 insertion tool for the MDF (reference PW1007A)
• 1 programming terminal, for example a PC running in VT 100 emulation mode or a VT 100
console
• 1 serial cable to connect the VT 100 programming terminal to the ICS via the main distribution
frame
• 1 drill and a set of drill bits to fix the cabinet to the wall
HJ3970BA01D980353483
HJ3970B
LT2
QTY : 1
1 2
Legend:
1- Product description
2- Product sales code