Installation manual

48 20/10/2004 PS10270JENAA01
6 Drill the holes. Insert four wall plugs suitable for the type of wall. Phase 1 in the diagram
below.
7 Fix the bracket to the wall with three of the screws.
Fit the fourth screw, leaving 4 mm (5/32 in) between the screw head and the wall. The fourth
screw is used to fix the cabinet in place. Phase 2 in the diagram on the next page.
8 Place the cabinet on its wall mount as shown in phase 3 in the diagram below.
100 mm (3.9 in) 100 mm (3.9 in)
175 mm
(6.9 in)
4 mm
(5/32 in)
1
2
3