Installation manual

PS10270JENAA01 20/10/2004 49
Fastening the cabinet to its support
1 Remove the connectors from the front panel of the power supply module.
2 Unscrew the metal parts designed to steady the power supply module during shipping as
shown below.
3 Remove the power supply module from the cabinet and place it on the table.
4 Inside the cabinet, insert the retaining screw and tighten it against the bracket as shown
below.
5 Refit the power supply module, using the appropriate screws to fix it in place.
6 Replace the connectors on the front panel of the power supply module.