Installation manual

68 20/10/2004 PS10270JENAA01
Wiring the local area network (LAN)
The PT2 card has an interface for an Ethernet/IEEE 802.3, 10/100 Mbit LAN. It provides a TCP/
IP-X25 gateway, plus IP tunneling and voice over IP functions (provided a VoIP daughter card is
installed).
A description of the PT2 card is given in Appendix A.
The PBX is connected to the Ethernet LAN by plugging the RJ45 connector of the PT2 card into
an available LAN socket, as shown in the diagram below.