Installation manual

86 20/10/2004 PS10270JENAA01
Connecting EDP terminals
The CA1 and CS1 cards are used to connect EDP terminals (DTE or DCE) in V24/V10 mode:
• The CA1 card provides four asynchronous terminal connections at a maximum speed of
19200 bit/s. XON/XOFF flow control is used.
Note: The V24/V10 interface is compatible with V24/V28 (RS232C) equipment.
• The CS1 card provides two synchronous SNA/SDLC connections at up 19,200 Kbit/s and
SNA/X25 connections at up to 64 Kbit/s.
system
DCE
DCE
ETTD
DTE-C
asynchronous serial link
type: "HDLC LOCAL"
synchronous serial link
type: "TRANSPAC"
PSTN
CS1
DCE
DCE
CS1
(PSTN/ISDN/X25)
DTE-P
synchronous serial link
type: "PAD"
CA1
DCE
DCE
DCE
DCE
DCE
M6501L/R