Installation manual

PS10270JENAA01 20/10/2004 9
About this guide
The M6501L/R IP PBX installer documentation has two guides and a record of customer data
programming to cover all aspects of installing and using the M6501L/R IP PBX:
• Installation and maintenance guide,
• Programming Guide
• Programming Record
The present guide entitled This Installation and Maintenance Guide is intended to help you install
the M6501L/R IP PBX.
This guide is set out in three parts:
• Initial installation
• Expanding the installation
• Maintenance and troubleshooting
There are two appendices:
• Appendix A: description of M6501L/R IP PBX cards.
• Appendix B: software alarm codes
You will also find a glossary of the technical terms used in this guide.
Each part contains a number of topics and a series of step-by-step tasks.
Understanding the parts in the guide
Part 1 takes you through the steps from unpacking to the first initialisation of the default
configuration. With a few adjustments, for example setting the correct time and date, your
system will be up and running after you have completed the procedures in this part. As it may not
be necessary to change all areas of the system from the default configuration, there are four
other parts containing topics to program as required. Any further information you may need is
provided as cross references.
Part 2 is about expanding an installation either by adding equipment or upgrading software.
Part 3 describes maintenance and troubleshooting. Troubleshooting is intended to help with
resolving possible programming errors and responding to errors detected by the system.